首页 新能源 查看内容

Energy Storage Systems - approval 储能系统 全球认证

摘要:  储能系统的安全.安全认证、试验和标准 - Safety of Energy Storage Systems - Safety certification, testing, and standards Cell certified to IEC 62619 (UL 1642) •Lithium ion cells used in NEC Energy Sol ...

储能系统的安全.安全认证、试验和标准 - Safety of Energy Storage Systems - Safety certification, testing, and standards

Cell certified to IEC 62619 (UL 1642)
•Lithium ion cells used in NEC Energy Solutions energy storage products

Module certified to UL 1973
•Lithium ion modules used in NEC Energy Solutions energy storage products
•Modules from LG are designed and manufactured uniquely for NEC

BMS certified to IEC 61508 / SIL 2
•Functional Safety certified to Safety Integrity Level 2 as part of UL 1973

Rack certified to UL 1973
•Battery rack used in NEC Energy Solutions energy storage products

System certified to UL 9540
•Complete system certification: NEC Energy Solutions energy storage systems

Large-Scale Fire Test to UL9540A
•NEC completed test Dec 2018 showing effectiveness of clean agent + water suppression

Installation compliant with NFPA 855
•New standard governing safe energy storage installations, covering site-specific hazard considerations


Multiple layers of safety features designed into the energy storage platform
• UL 9540, IEEE 1547, UL 1741SA, NFPA 855 compliance
• Electrical fault protection compatible and coordinated with downstream protection
• Fault current/voltage limited inverters with full electrical protection & isolation switches
• AEROS® controls monitors and ensures operation within safe limits and can disconnect power if needed.
• Automated fire suppression system on every GBS® battery container; additional safety feature options available
• Compliant with NFPA 70/70E, UN38.3, IEEE 693, IEC62040-1 and other international safety standards
• Compliant with UL1973 and IEC62619
• BMS provides functional safety, certified to IEC61508 Safety Integrity Level 2 (SIL 2)
• Automated switches (contactors) disconnect rack from the system if necessary
• High voltage fusing and ground fault protection
• Compliant with UL1973, IEC62619, and UN38.3
• Module monitors every cell bank voltage and module temperatures
• Integral module-level fuse
• All cells certified to UL1973, UL1642 and IEC62619 lithium ion cell safety standards
• All cells pass UN38.3 transportation safety test standards

System Certifications and Compliances
Safety
NFPA 855
Standard for the Installation of Stationary Energy Storage Systems
UL 9540
Safety for Energy Storage Systems and Equipment
UL 1973
Batteries for Use in Light Electric Rail Applications and Stationary Applications
UL 1642
Standard for Lithium Batteries
IEC 62619
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium cells and batteries, for use in industrial applications
UN 38.3
UN Recommendations on the Transport of Dangerous Goods Manual of Test and Criteria
IEC 61508
Functional Safety of Electrical/Electronic/Programmable Electronic Safety-related Systems
IEC 62040-1
Uninterruptible power systems (UPS) – Part 1: General and safety requirements for UPS
CE – Conformity
CE Marking - European Conformity, Safety and EMC
NFPA 70E
Standard for Electrical Safety in the Workplace
NFPA 70
(NEC) National Electric Code (whenever applicable)
ANSI/IEEE C-2
National Electrical Safety Code (NESC)
ANSI/IEC 60529
Degrees of Protection Provided by Enclosures (IP Code)
IEC/UL 60950-1
Information technology equipment - Safety - Part 1: General requirements

Grid Interconnect
UL 1741 (SA)
Standard for Inverters, Converters, Controllers and Interconnection System Equipment for Use With Distributed Energy Resources for Distributed Resources
IEEE 1547
IEEE Standard for Interconnecting DR with EP
G59
Recommendations For The Connection Of Generating Plant To The Distribution Systems Of Licensed Distribution Network Operators (UK)
Other regions
Other interconnect standards as may be required

Seismic and Enclosure Integrity
ANSI/IEC 60529
Degrees of Protection Provided by Enclosures (IP Code)
IEEE 693-2005
IEEE Recommended Practice for Seismic Design of Substations

Electromagnetic Compatibility
FCC 47 CFR Part 15
subpart B class A

Radio Frequency Devices (Federal Communications Commission, CFR)

EN 55011
Industrial, Scientific and Medical (ISM) Radio-Frequency Equipment - Electromagnetic Disturbance Characteristics - Limits and Methods of Measurement
IEC/EN 61000-6-2
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards – Immunity standard for industrial environments
IEC/EN 61000-6-4
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
IEC/EN 61000-6-5
Electromagnetic compatibility (EMC) - Part 6-5: Generic standards - Immunity for equipment used in power station and substation environment

IEC/EN 61000-6-7
Electromagnetic compatibility (EMC) - Part 6-7: Generic standards - Immunity requirements for equipment intended to perform functions in a safety-related system (functional safety) in industrial locations

Environmental

EU Battery Directive
2006/66/EC of the European Parliament and of the Council of 6 September 2006 on batteries and accumulators and waste batteries and accumulators and repealing Directive 91/157/EEC
RoHS
2011/65/EU Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS)
Proposition 65 (CA)
Proposition 65 Safe Drinking Water and Toxic Enforcement Act of 1986
China RoHS II
Management Methods for the Restriction of the Use of Hazardous Substances in Electrical and Electronic Products Order No. 32 (China RoHS II)

REACH
Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH)

储能系统认证与验证

更多关于储能系统全球认证,测试,请查阅 https://dzfa.com/thread-5332-1-1.html 更多可以联系曾工 151 0200 1358 (微信同号),将为您提供一站式储能光伏全球认证服务。

如果文章对你有帮助,欢迎点击上方按钮打赏作者

关闭

赞助商上一条 /2 下一条